Hitachi VT-DX815A - Manual (Page 19)

DSS® BOX WITH DIGITAL INTERFACE HOOKUP – RF HOOKUP
[C]
19
DSS® BOX WITH DIGITAL INTERFACE HOOKUP – RF HOOKUP [C]
WITH THIS HOOKUP
YOU CAN......
• WATCH AVAILABLE TV OR DSS® CHANNELS
• RECORD AND PLAYBACK A DSS® CHANNEL IN THE D-VHS
FORMAT WITH DSS® BOX
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
• RECORD A CHANNEL OTHER THAN DSS® AND WATCH A DSS®
CHANNEL
Note: pic
When connecting the digital A/V cable, be careful of the orientation of its
connector.
Hookup C Illustration pic
Note: Your VCR cannot receive RF signals from the antenna or cable through
the DSS® box. Connect the antenna or cable cord to the IN FROM ANT jack of
the VCR, not to the RF IN/OUT jacks of the DSS® box.
TABLE C
FUNCTION
CHANNEL SELECTION
VCR indicator
(Press the VCR/TV
mode select button to
turn the VCR indicator
on or off)
TV VCR DSS® BOX
Select and Watch
Channels using TV Select Channel to
Watch OFF
(TV mode)
Select and Watch
Channels using VCR 3 or 4 Select Channel to
Watch ON
(VCR mode)
Record and Watch the
Same Channel 3 or 4 Select Channel to
Record ON
(VCR mode)
Record One Channel
Watch Another Select Channel to
Watch Select Channel to
Record OFF
(TV mode)
Record and Watch the
Same DSS® Channel 3 or 4 Select dSS Select Channel to
Watch/Record ON
(VCR mode)
Watch a Channel other
than DSS® and Record a
DSS® Channel Select Channel to
Watch Select dSS Select Channel to
Record OFF
(TV mode)
Watch Playback of a Tape 3 or 4 ON
(VCR mode)
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either
channel 3 or channel 4. You need to select the appropriate channel.
• Turn on the power of both the TV and the VCR. Press the ANT. OUT