Harrison Labs MIXBUS V2.0.2 - Manual (Page 24)

After a send has been configured, a double-click on the send will launch the Send Editor:
In addition
to the output
manage-
ment, The
Send Editor
also has a
volume slid-
er and a
panner (if
the number
of outputs is
> 1).
Inserts
An Insert incorporates a Jack "send" output and a Jack "return" input. The Insert send/return allows the audio signal
to be routed out of a channel and back into it, after performing some external processing. Inserts are often used to
"patch in" a piece of outboard gear that is not available as a plug-in.
• Measure Latency: Once your insert is connected to a Jack-aware program, or an external piece of gear, then
click this button to measure the latency. If the Insert is used on a track or Mix Bus, this delay will be accommo-
dated automatically.
Outputs
• Add/Remove: adds/removes a Jack port to the insert "send".
1 12 2..0 0 R Re ed diir re ec ct ts s:: P Pllu ug g--iin ns s,, S Se en nd ds s & & IIn ns se er rt ts s
24 Section 12.0 - Redirects: Plug-ins, Sends & Inserts Mixbus User Guide
Note: Inserts are created "deactivated", you must Activate the insert before it will work.
%