Keyboard and mouse, Keyboard and mouse 3-5 – HP Model 743 PC User Manual

Page 69

3-5

Typical Installation in a VME Card Cage

Keyboard and Mouse

This section provides step-by-step instructions for connecting a keyboard
and mouse to your Model 743.

1 Unpack your new keyboard and place it near your board computer.

2 Plug the keyboard cable connector into your board computer at the PS/2

connector labeled PS/2 0 Kbd.

NOTE:

The keyboard must be connected to PS/2 0 to be operational.

3 Unpack your new mouse and locate the mouse’s black rubber ball in the

mouse box.

4 Remove the ball plate from the bottom of the mouse. Insert the ball and

replace the ball plate.

5 Plug the mouse cable connector into your board computer at the PS/2 con-

nector which is labelled PS/2 1.