HP Model 743 PC - Manual (Page 121)

A-11
The Boot Console Interface
Configuring the Console Path and Display Format
==== PATH CONFIGURATION ======================
PRIMARY PATH is now [ SCSI.6.0 ]
ALTERNATE PATH is now [ LAN.090009-723333 ]
CONSOLE PATH is now [ RS-232 (A) ]
KEYBOARD PATH is now [ PS/2 (0) ]
Key Operation
--- -----------------------------------------
1 Primary Boot Path
2 Alternate Boot Path
3 Console Path
4 Keyboard Path
... .........................................
0 Previous Menu
77 Reset the System
----------------------------------------------
Press Key, then press [Enter/Return]
2 From the Path Configuration menu, enter the following to select
the Console Path :
3 Enter
The system displays a Console Path menu, similar to the following:
==== CONSOLE PATH ============================
CONSOLE PATH is now [ GRAPHICS 1 ]
Key Device Path
--- -----------------------------------------
1 GRAPHICS 1
2 RS-232 (A)
3 Null Device
4 RS-232 (B)
... .........................................
0 Previous Menu
66 Rescan for console devices
77 Reset the System
----------------------------------------------
To set the CONSOLE PATH, Press Key, then press
[Enter/Return]