HP Model 743 PC - Manual (Page 124)

A-14
The Boot Console Interface
Booting and Resetting the Model 743
5 Enter
==== BOOT SCSI DEVICE ========================
PRIMARY PATH is now [ SCSI.6.0 ]
ALTERNATE PATH is now [ SCSI.5.0 ]
CURRENT PATH is now [ SCSI.0.0 ]
Key Parameter Value
--- ------------------- --------------------
1 ID 0
2 LUN 0
Key Operation
... .........................................
0 Previous Menu
33 Effective ISL Mode [ AUTOMATIC ]
44 Set PRIMARY PATH to Current Device
55 Set ALTERNATE PATH to Current Device
77 Reset the System
99 Boot This Device Now
----------------------------------------------
Press Key, then press [Enter/Return]
5 To enter the desired SCSI ID type:
1 Enter
Enter Device ID (valid range is 0..7):
6 Enter
This will change the CURRENT PATH to SCSI.6.0
6 To boot from this device type:
99 Enter