HP Model 743 PC - Manual (Page 127)

A-17
The Boot Console Interface
Displaying and Setting Paths
Displaying and Setting Paths
This section provides instructions for selecting the primary path, selecting an
alternate path, and reordering the boot device list.
A path is the hardware address of a device that is attached to the I/O system
of your system.
To display the current settings for the system paths, select
Path Configuration from the Main Menu by typing the following:
2 Enter
A screen similar to the following appears:
==== PATH CONFIGURATION ======================
PRIMARY PATH is now [ SCSI.6.0 ]
ALTERNATE PATH is now [ LAN.080009-723333 ]
CONSOLE PATH is now [ GRAPHICS 1 ]
KEYBOARD PATH is now [ PS/2 (0) ]
Key Operation
--- -----------------------------------------
1 Primary Boot Path
2 Alternate Boot Path
3 Console Path
4 Keyboard Path
... .........................................
0 Previous Menu
77 Reset the System
----------------------------------------------
Press Key, then press [Enter/Return]
Selecting the Primary Path
This section provides instructions for selecting the primary boot device path.
1 To reconfigure the primary boot device path, select Primary Boot
Path from the Path Configuration menu by entering the follow-
ing: