HP XU800 - Manual (Page 99)

99
5 HP BIOS
Adaptec SCSISelect Configuration Utility
Adaptec SCSISelect Configuration Utility
The AIC-7892 BIOS includes the SCSISelect configuration utility, which
allows you to view and change host adapter settings. SCSISelect also lists
the SCSI IDs of devices on the host adapter, formats SCSI disk drives, and
checks drives for defects.
Default Settings
The following tables show the default configuration settings that can be
changed. The first table shows the global settings which impact the host
adapter; the second table shows the boot device options which allow you to
specify the boot device; the third table shows the different advance
configuration options; and the fourth table shows the device settings which
apply to individual devices.
SCSI BUS Interface Options
Host Adapter and SCSI Parity
Checking Settings Default
Settings Comments
Host Adapter SCSI ID 7 Each device on the SCSI bus, including the adapter,
must have a unique SCSI ID. Allowable IDs are 0 - 15.
SCSI Parity Checking Enabled Each adapter verifies the accuracy of data transfer on
the SCSI bus.
Boot Device Options
Boot Target ID and Boot LUN
Number Settings Default
Settings Comments
Boot Target ID 0 To specify a different boot device, choose a SCSI ID
0 - 15. If the boot device has multiple logical units, you
must specify the boot LUN, which can be 0 - 7.
Boot LUN Number 0
Advanced Configuration Options
Options Default
Settings Comments
Reset SCSI Bus at IC Initialization Enabled BIOS resets the SCSI at POST time (scans the bus for
SCSI devices).