HP XU800 - Manual (Page 14)

14
1 System Overview
Internal Features
Rear View
Internal Features
The core architecture of the HP Kayak XU800 PC Workstation is
constructed around: Memory Controller Hub (MCH), Input/Output
Controller Hub (ICH), FirmWare Hub (FWH) and the Host bus.
The HP Kayak XU800 PC Workstation can support up to two Pentium III
processors. This processor is described on
page 65 .
The components of the system board are described in chapter 2 ; the
characteristics of the PC Workstation’s video and storage devices are
described in
chapter 3 ; mass storage devices are described in chapter 4 ; the
HP BIOS routines are summarized in chapter 5 ; and the Power-On Self-Test
routines are described in chapter 6 .
Parallel port
Serial port A
Keyboard connector
Dual USB (12 Mbps)
connectors
Serial port B
MIDI connector
Line Out connector
Line In connector
Microphone connector
External SCSI
connector
Mouse connector
Display connector