HP Media Center PC - Manual (Page 64)

60
HP Media Center PC Getting Started Guide
Configuring Audio for InterVideo WinDVD Player
Follow these steps after you have installed,
connected, and configured your speakers.
The InterVideo WinDVD program (select models
only) is set up for two-speaker (stereo) output. To
hear all speakers from DVD movies recorded with
multichannel audio, change the audio properties
for WinDVD to match your speaker configuration
(if your InterVideo WinDVD program supports
more than two channels).
If you want to play a stereo DVD, you may change
the audio properties of WinDVD to match the
recorded DVD audio output.
1
Insert a DVD.
Or
Click Start, choose All Programs,
InterVideo WinDVD, InterVideo
WinDVD Player, and then click
InterVideo WinDVD. The WinDVD video
window opens.
2
Right-click anywhere in the WinDVD video
window, and then click Setup. The Setup
window opens.
3
Click the Audio tab.
4
Select Audio Output Configuration.
Choose Analog or Digital (S/PDIF).
Click Apply.
5
Select Audio Speaker Configuration.
Click the option for the number of speakers to
match your multichannel speaker system.
6
You can click the Test button to test the
speakers. You should be able to hear the
speakers. Click Stop, and then click OK.
Using Headphones
Your PC comes with a Headphones
connector (lime green) on the front of the
PC. The headphones connector is labeled
with a headphones icon. You can also connect headphones to the
Line Out connector (lime green) on the back
of your PC.
Using a 2.1 speaker system with headphones
For select models with the 2.1 speaker system, look
for the headphones connector on the right side of
the main speaker. When headphones are plugged
in, the sound to the speakers and the subwoofer is
muted.
OUT