HP Media Center PC - Manual (Page 28)

24
HP Media Center PC Getting Started Guide
Wall to cable TV set-top box or satellite box to VCR and TV using S-video cable or
composite video cable between the box and the VCR or TV
1
Do not detach any cables from your existing
setup.
2
Connect an additional cable:
■ Using S-video (not included): Connect an
additional S-video cable to a second output
on the set-top box or satellite box. Plug the
other end of the cable into the S-video In
connector on the back of the PC.
Or
■ Using composite video: Connect an
additional composite video cable to a
second output on the set-top box or satellite
box. Connect the other end of the cable to
the S-video to composite video adapter
cable; connect the adapter to the S-video In
connector on the back of the PC.
3
When using a composite video or S-video
cable, you must also plug audio cables (not
provided) from your satellite or set-top box
into the Audio In right (red) and Audio In left
(white) connectors on the back of the PC.
4
Be sure to connect the remote sensor control
cable and position it on your set-top box or
satellite box. This allows the PC to change the
channel on the box. See “Connecting the
Remote Sensor” on page 21.
.