Hoshizaki KM-151BAH - Manual (Page 68)

63
6) The Spray Guide is located under the Water Supply Pipe. Pull off the Spray Guide
from the Evaporator Plate.
7) Refit the removed parts in the reverse order of the removal procedure. Check for
water leaks.
8) Plug in the icemaker or connect the power source.
20. DOOR
1) Remove the Top Panel.
2) Move the Door to fit the Door Shaft in the inlet of the Door Channel. Slide up the
Door to release it from the Door Channel.
3) Refit the Door in the reverse order of the removal procedure. Do not forget to fit the
Collar on the Door Shaft, or the Door will not open or close smoothly.
Fig. 30
Door Channel