Hoshizaki FD-1001MRH(-C) User Manual
Hoshizaki, Hoshizaki america, inc
This manual is related to the following products:
Table of contents
Document Outline
- Important Safety Information
- I. Specifications
- A. Nameplate Rating
- 1. FD-1001MAH(-C) (air-cooled)
- 2. FD-1001MWH(-C) (water-cooled)
- 3. FD-1001MRH(-C) (remote air-cooled)
- 4. FD-1001MLH(-C) (low-side, parallel rack system)
- B. Dimensions / Connections
- 1. FD-1001MAH(-C) (air-cooled)
- 2. FD-1001MWH(-C) (water-cooled)
- 3. FD-1001MRH(-C) (remote air-cooled)
- 4. FD-1001MLH(-C) (low side, parallel rack system)
- II. Installation and Operating Instructions
- A. Checks Before Installation
- B. How to Remove Panels
- C. Location
- D. Setup
- E. Electrical Connection
- F. Installation of Remote Condenser Unit
- 1. Checks Before Installation
- 2. Location
- 3. Setup
- 4. Line Set
- 5. Electrical Connection
- 6. Stacking Remote Condenser Units
- G. Connection to an R-404A Parallel Rack System
- 1. Line Set Installation
- H. Water Supply and Drain Connections
- 1. Icemaker
- 2. Water-Cooled Condenser
- I. Final Checklist
- J. Startup
- K. Bin Control Check
- 1. Infrared Sensor Check
- 2. Mechanical Backup Bin Control Check
- 3. Infrared Sensor Shutdown Delay
- III. Cleaning and Maintenance
- A. Cleaning and Sanitizing Instructions
- 1. Cleaning Solution
- 2. Cleaning Procedure
- 3. Sanitizing Solution
- 4. Sanitizing Procedure - Initial
- 5. Sanitizing Procedure - Final
- B. Maintenance
- C. Preparing the Icemaker for Long Storage