beautypg.com

Fig. 14, Fig. 15 – Hoshizaki KM-151BAH User Manual

Page 57

background image

52

Fig. 14

[b] KM-151BAH

1) Unplug the icemaker or disconnect the power source.

2) Remove the Top Panel and unscrew the Rear Panel.

3) Disconnect the Connector of the Float Switch lead (gray).

4) The Float Switch is located behind the Pump Motor. Pinch where indicated (1) and

pull it forward diagonally (2) to unhook the Float Switch.

5) Remove the screw securing the Float Switch to the Bracket.

6) Attach the new Float Switch to the Rail of the Bracket. Secure them with the screw

by fitting the round end of the slot to the screw hole.

Pump Motor

Float Switch

Hook (A)

Hook (B)

Float Switch

Bracket

Screw

Pinch

Pull

Fig. 15

Rail

Round end of slot
* Secure here with

screw

When fitted properly, top ends
of Bracket and Float Switch
become flush with each other

Screw