Float switch, Fig. 13 – Hoshizaki KM-151BAH User Manual

Page 56

12. FLOAT SWITCH

[a] KM-61BAH, KM-101BAH

1) Unplug the icemaker or disconnect the power source.

2) Remove the Top Panel and unscrew the Rear Panel.

3) Disconnect the Connector of the Float Switch lead and remove the lead wire from

the grommet opening.

4) Remove the Water Tank (see “16. WATER TANK”).

5) Remove the screw securing the Float Switch.

6) Install the new Float Switch in the reverse order of the removal procedure.

7) Reﬁt the panels in their correct positions.

8) Plug in the icemaker or connect the power source.

Fig. 13

Grommet

Opening

Mounting Screw

Float Switch
* Attach to three arrowed

surfaces when ﬁxing
with screw