Epson 10600 - Manual (Page 97)

2-30
2-30 | Using Paper and Other Media
6. Press the + or - button to select the number noted in step 5. Then press
Enter .
7. Press the Item button to select any of the menu options listed in the
table on page 2-28.
8. Use the + or - button to make any necessary changes, then press Enter
to save your new setting.
9. Press the Pause or SelecType button to exit the Paper Configuration
menu.
Once you have created your customized settings, you can recall them
whenever they’re needed:
1. Press the SelecType button until PAPER CONFIG. MENU appears on
the display.
2. Press the Item button. You see PAPER NUMBER=1.
3. Press the + or - button to select the registered number you want to use,
or select the standard setting, STD . Then press the Enter button.
4. Press the Pause or SelecType button to exit the Paper Configuration
menu.
When you change media, make sure you select the correct setting or change
it back to
STD .