Epson 10600 - Manual (Page 113)

3-16
3-16 | Printing with EPSON Drivers for Macintosh
You see the Configuration Settings dialog box:
3. Select from the following configuration options:
• Error notification lets you choose whether you want your system to
beep and display error message text or just display text if your
printer encounters an error.
• Warning lets you choose whether warning messages beep and
display text or display text only.
• Temporary Spool folder and Temporary High Speed Copies
folder let you select the folders on your hard disk that store the
temporary files created when you send a job to the printer. Click the
Select button to change the folder from the default folder shown.
• Data will be sent to the printer after being stored on your disk
prevents print head pausing. Normally, graphics are sent in
rectangular bands. When you select this option, your Macintosh
stores the entire image on its hard drive and then sends it to the
printer as a whole (recommended only for older Macintosh
systems).
• The last two checkboxes let you choose to have your software check
for errors or low ink levels before starting your print job.
4. When you’re finishing changing your configuration options, click OK to
return to the utility menu.
Select how you want
to be notified of errors
and warnings
Select where you want
print job files stored
Click here to check for
errors and/or the ink
level before printing
Click here to return to the default settings
Note
Warning messages
allow printing to
continue. Error
messages are more
serious and cause
printing to stop.