Epson 10600 - Manual (Page 45)

1-30
1-30 | Setting Up the Printer
7. If you’re connecting through the parallel port or Ethernet port, see the
note at left. Otherwise, follow the instructions below for your system.
Windows 95 or NT: Turn on your printer by pressing the
P
Power
button, then go to step 9.
Windows 98, Me, or 2000: When you see a window asking you to turn
on your printer, press the
P
Power button. Then go to step 9.
Windows XP:
• When you see a window asking you to turn on your printer, press
the
P
Power button.
• Wait until you see the Found New Hardware Wizard for the Stylus
Pro 10600.
• Once the Found New Hardware Wizard appears, select Install the
software automatically , then click Next .
• Make sure the file shown below is selected. Then click Next .
Note
If you’re connecting
through the parallel or
Ethernet port, do not turn
on your printer when you
see a window telling you
to do so. Instead, wait
until the Stop Searching
button appears. Then
click the button and go to
step 9.
Select this file