Epson 10600 User Manual

Page 50

1-35

Setting Up the Printer

1-35

3. Select from the following options:

•

High Speed Copies

speeds up printing of multiple copies of the

same document using hard disk space as a cache. If you have
multiple hard drives, you can select a high speed copy folder for
storing copies.

•

Show Progress Meter

lets you control whether or not the Progress

Meter is displayed when you send a print job.

•

EPSON Printer Port

(Windows 95, 98, or Me parallel connection

only) lets you optimize the transfer rate of your printer port for
EPSON printers instead of using the Windows default printer port.
You may see one of these messages beneath the

EPSON Printer

Port

option:

High speed (DMA) transfer enabled

tells you that you’re already

using fast DMA transfer mode.

For higher data transfer rates, use DMA transfer

lets you know

that you can speed up printing by enabling DMA transfers on your
system. See your electronic Reference Guide for instructions on using
DMA transfers, if your computer supports them. For more
information, see your computer documentation or contact your
computer manufacturer’s technical support. If you see no message,
you cannot enable DMA transfers.

•

Always spool RAW datatype

(Windows 2000, XP, and NT only)

lets you spool documents using the RAW format instead of the
EMF (metafile) format. Because the RAW format requires fewer
resources, printing is faster and you can avoid certain problems,
such as insufficient memory or disk space.

4. Click

to close the Speed & Progress dialog box and return to the

Utility menu. Then click

again to exit the Printers utility.