Epson 10600 - Manual (Page 94)

2-27
Using Paper and Other Media | 2-27
Turning Off Paper Monitoring
The printer normally stops and displays an error message if you try to print
an image wider than the paper, or if paper is fed at an angle. You can turn off
the paper size check and/or paper alignment check if you don’t want to use
these monitoring features. However, ink may be sprayed on the platen if you
print an image that is too wide for the paper. Follow these steps to turn off
paper monitoring:
1. Press the SelecType button. PRINTER SETTING MENU appears on
the display.
2. Press the Item button repeatedly until PAPER SIZE CHK=ON or
PAPER ALIGN CHK=ON appears on the display.
3. Press the + or – button. PAPER SIZE CHK=OFF or PAPER ALIGN
CHK=OFF appears on the display.
4. Press the Enter button to save your new setting.
5. Press the Pause or SelecType button to exit the Printer Setting menu.
Restoring Default Settings
You can erase all settings you have made in the Printer Setting menu and
restore them to their default values. Follow these steps:
1. Press the SelecType button. PRINTER SETTING MENU appears on
the display.
2. Press the Item button repeatedly until INIT SETUP=EXEC appears on
the display.
3. Press the Enter button to erase all settings and restore the defaults.
4. Press the Pause or SelecType button to exit the Printer Setting menu.