Epson 10600 - Manual (Page 93)

2-26
2-26 | Using Paper and Other Media
Printing Trim Lines
If you’re printing on roll paper, you can have the printer print trim lines on
the right edge of your images or pages (if you’re using Auto Cut) or on the
right and bottom edge (if you’re not using Auto Cut). Follow these steps:
1. Press the SelecType button. You see the PRINTER SETTING MENU .
2. Press the Item button repeatedly until you see PAGE LINE=OFF . This is
the default setting.
3. Press the + or – button. PAPER LINE=ON appears on the display.
4. Press the Enter button to save your new setting.
5. Press the Pause or SelecType button to exit the Printer Setting menu.
If you’re using the EPSON printer driver, you can also specify trim lines
through your print options. See page 3-3 (Macintosh) or page 4-6
(Windows) for more information.
Controlling Roll Paper Margins
The default margins for roll paper are 0.12 inches or 3 mm (left and right)
and 0.59 inches or 15 mm (top and bottom). You can use the Printer
Settings menu on the control panel to set all margins to 3 mm or 15 mm.
1. Press the SelecType button. PRINTER SETTING MENU appears on
the display.
2. Press the Item button repeatedly until ROLL MARG=T/B15MM
appears on the display. This is the default setting.
• Press the + button once to set all margins to 3 mm.
ROLL MARG=3MM appears on the display.
• Press the + button again to set all margins to 15 mm.
ROLL MARG=15MM appears on the display.
You can use the + or – button to cycle through all three settings.
3. When you select the setting you want, press the Enter button to save it.
Then press the Pause or SelecType button to exit the menu.
Note
Print quality may be
affected near the cut
edges if you change the
top and bottom margins
to 3 mm.