Epson 10600 - Manual (Page 85)

2-18
2-18 | Using Paper and Other Media
Removing Unused Roll Paper
Once your printouts are removed from the printer, follow these steps to
remove any unused paper:
1. Pull the paper set lever out to the released position.
2. Wind the remaining paper back onto the roll.
3. Secure the paper with a roll paper belt. The shorter belt is for 2-inch roll
paper; the longer one is for 3-inch rolls.
Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate or Pause light
is flashing.
2-inch roll paper belt 3-inch roll paper belt