Epson 10600 - Manual (Page 47)

1-32
1-32 | Setting Up the Printer
Setting Up Your FireWire Port
If you’re connecting with FireWire (IEEE-1394) on a Windows system, you
may see a Found New Hardware Wizard for an EPSON 1394 Printer. If so,
follow the steps below to install the driver software for the port. When done,
resume installing the printer software where you left off.
1. At the first Found New Hardware screen, click Next .
2. At the screen below, click Search for a suitable driver , then click
Next .
3. Select Specify a location and click Next .
4. Click the Browse button and locate the correct Win2K_XP folder on
the EPSON CD-ROM:
• If your printer uses Archival ink, browse to
the
Drivers\Cf\Win2K_XP folder
• If you’re printer uses Photographic Dye, browse to
the
Drivers\Dye\Win2K_XP folder
• If you’re printer uses UltraChrome ink, browse to
the
Drivers\Uc\Win2K_XP folder
5. Click OK , then click Next to install the driver.
6. When done, click Finish . Then return to the printer software
installation instructions where you left off.
Note
You may see an
additional Found New
Hardware screen for
IEEE-1394. If so, be sure
to browse to the correct
folder for your ink type
and operating system.