Epson 10600 - Manual (Page 52)

1-37
Setting Up the Printer | 1-37
You see the Utility menu:
4. Click the Nozzle Check button, then click Print to print a nozzle check
pattern.
5. Examine the printed pattern. It should be complete, with no gaps or
missing dots, as shown below; in addition, all the dots should be in place
and not deflected. (You may need to use an eye loupe to check the
pattern.)
6. If the pattern is complete, click Finish and close the Utility menu, then
continue on to “Aligning the Print Head” on page 1-39.
Click to run a
nozzle check