Epson 10600 - Manual (Page 78)

2-11
Using Paper and Other Media | 2-11
Using Roll Paper
The printer comes with one 2-inch and one 3-inch spindle, so you can have
two types of roll paper available for printing at all times (with manual
switching). Switching from one paper roll to another is a simple process.
High-tension spindles (available in both 2-inch and 3-inch diameters) are
recommended options for printing on certain media such as EPSON
Synthetic Paper, Smooth Fine Art Paper, and Textured Fine Art Paper; the
higher tension keeps the paper from unrolling during use.
Other options for using roll paper include the Automatic Take-up Reel
System (see your online Reference Guide for operating instructions) and the
Manual Media Cutting System (for use with heavy media).
Loading Paper onto the Spindle
To load roll paper onto a spindle, follow these steps:
1. Slide the removable paper stop off the left end of the spindle.
2. Position the roll so the paper unwinds as shown:
3. Slide the roll onto the spindle so it fits securely against the paper stop.
4. Slide the removable paper stop back onto the spindle and insert it into
the end of the roll.
Note
You can purchase roll
paper spindles and other
options from the EPSON
Pro Graphics web site
(http://prographics.epson.
com) or your authorized
EPSON dealer. See
page 2 for additional
information.