Epson 10600 User Manual
Page 105
3-8
3-8
|
Printing with EPSON Drivers for Macintosh
6. Choose one of the following Color Management settings:
•
Color Controls
Lets you specify individual values for adjusting brightness, contrast,
saturation, and CMY inks, or choose from the three Color
Adjustment modes. You can also choose from three Gamma
settings, which control image contrast by modifying the midtones
and midlevel grays. For descriptions of the available settings, see the
table on page 3-9.
•
PhotoEnhance4
Allows you to correct noise and other problems common to digital
camera images. Also lets you see a sample image that reflects the
settings you choose. See page 3-9 for a description of the available
settings.
•
ColorSync
Lets you select from three Rendering Intent settings for mapping
colors to your printer’s
EPSON Standard
profile. (See page 3-10
for descriptions of the available settings.) Normally, you should use
the color management features of your imaging software instead.
•
No Color Adjustment
Disables color management in the printer driver. Choose this mode
if you want to use your own color management system.
7. Click
Save Settings
if you want to have your advanced settings
available for reuse. Then type a name for the group of settings and click
Save
. The name is added to your list of custom settings.
8. When you’re finished setting advanced printer options, click
OK
.
TIP
If you turn off color
management, you can
still control the ink
density. See “Paper
Configuration Options”
on page 3-10.