Exabyte MAGNUM 1X7 LTO - Manual (Page 92)

76
P RODUCT M ANUAL 1012581
C
HAPTER
5—A
UTOLOADER
O
PERATION
3. 3. 3. 3. Press to see the menu selections, then press or until the following
screen appears:
4. 4. 4. 4. Press . The following screen appears:
5. 5. 5. 5. Press or to switch between OFF and ON. If you want cartridges
loaded into the tape drive during the demo, select ON. If not, select OFF.
6. 6. 6. 6. Press . A confirmation message appears:
7. 7. 7. 7. Press to start the demo (or to cancel the demo). The autoloader
begins the demo and displays a status screen:
The number on the left indicates the total number of moves that have taken
place. The number on the right indicates which cartridge is currently being
positioned at, loaded, or unloaded from the tape drive. The text reads
MOVE, LOAD, or UNLOAD, depending on the operation being
performed.
8. 8. 8. 8. To stop the demo, press any button. The LCD displays the Home screen.
Note: If a cartridge is in the tape drive when you stop the demo, the
cartridge is unloaded.
R u n S y s t e m D e m o ?
S e t L o a d O p t i o n
O F F N o w ?
S t a r t D e m o N o w ?
D E M O :
n n n n M O V E n n