Assembling the rails, Figure 2-3 – Exabyte MAGNUM 1X7 LTO User Manual
Page 28
12
P
RODUCT
M
ANUAL
1012581
C
HAPTER
2—I
NSTALLING
THE
A
UTOLOADER
To install the library in a rack, you must obtain these tools:
A
SSEMBLING
THE
R
AILS
1.
1.
1.
1.
Measure the depth of your rack—Using a tape measure, measure the inside
distance from the front mounting holes of your rack to the back mounting
holes. See
, distance (E).
2.
2.
2.
2.
Position the front and back sections of the left-side rail as shown in
, with the front rail section on top of the back rail section. Spread
the sections to the distance you measured in step 1.
3.
3.
3.
3.
Assemble the left rail using four M5 screws. Keep the screws loose so that
you can adjust the length of the assembled rail, if necessary.
#2 Phillips screwdriver
Level
Tape measure
Figure 2-3 Assembling the left-side rail
Left-side rails (viewed from front)
Front
Back
Front
section
flange
section
M5 screw
(black)
Small back flange
(attach the library
here in final step)
Back flange
Front
Back