Exabyte MAGNUM 1X7 LTO - Manual (Page 91)

O CTOBER 2006 M AGNUM 1 X 7 LTO A UTOLOADER 75
R
UNNING
S
YSTEM
D
EMOS
3. 3. 3. 3. Press to see the menu selections, then press or until the following
screen appears:
4. 4. 4. 4. Press . A confirmation message appears:
5. 5. 5. 5. Press to begin the reset (or to cancel the reset).
The autoloader resets and performs a cartridge inventory. When the reset
is complete, the Home screen appears.
R
UNNING
S
YSTEM
D
EMOS
The autoloader has a built-in demo program that can be used for testing or
demonstrating autoloader operation. When performing its demo program, the
autoloader loops through the following functions:
Positions a cartridge cell in front of the tape drive.
If the cell contains a cartridge, moves the cartridge to the tape drive.
If the Load option (described in this section) is on:
Inserts the cartridge into the tape drive.
Waits for the tape to be loaded.
Instructs the tape drive to unload and eject the cartridge.
Returns the cartridge to its cell.
Repeats until any front panel button is pressed.
To run the autoloader demo:
1. 1. 1. 1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42 ).
2. 2. 2. 2. Press or until the Diagnostic menu appears:
R e s e t L i b r a r y ?
R e s e t t h e
L I B R A R Y N o w ?
P e r f o r m a
D i a g n o s t i c