Elmo EDR-X216 - Manual (Page 71)

Note: If you are viewing existing cameras and you would like to add additional cameras, press the Stop button on the main
screen, then select the other desired cameras.
"
'
)
)
)
%
It is possible to connect to multiple servers with ELMO DVR Remote. Once you have created multiple servers in the list of
connections, you can connect to more than one server.
"
'
)
To connect to multiple servers, follow these steps:
1. From the list of servers, double-click on the server you wish to connect to. The Connecting Server - LAN status window appears:
Figure 47. Connecting Server progress window
2. To view a different connected server click the up/down buttons on the multi-site selection tool:
Figure 48. Multi-Site selection tool
3. To stop viewing cameras on a server without disconnecting, click the Stop button on the main screen.
4. To stop viewing a camera, right-click on the camera name.
. "
'
)
To disconnect a connected server, follow these steps :
1. Select the server with the Server Select tool if there are more than one connected servers.
"
'
)
63