Sending an alert via another dvr server, Server information, Overview – Elmo EDR-X216 User Manual
Page 28
4.
Select Motion for Emergency
5.
Select the Sensor for Emergency
6.
Enter the Emergency Phone Number and an Alternate Phone Number .
7.
Enter the Transfer Time .
8.
Click Save to save your settings.
' * ) & # ' )
To send an alert to another DVR server, follow these steps:
1.
Select LAN/PSTN/LEASED CIRCUIT(Router).
2.
Select the Bandwidth Throttle.
3.
Enter Frequency of Call Out.
4.
Select Motion for Emergency.
5.
Select the Sensor for Emergency.
6.
Enter the Emergency IP Address .
7.
Enter an Alternate Phone Number.
8.
Enter the Transfer Time .
9.
Click Save to save your settings.
' ) .
) ) %
The Server Information tab allows you to set or get information about your server.
20 - ELMO USER MANUAL 2003G