Elmo EDR-X216 - Manual (Page 11)

Please avoid these conditions when selecting a location for your system:
- Excessive heat, such as direct sunlight or heating appliances
- Moisture, dust, and smoke
- Magnetic fields or electrical waves
- Below freezing temperatures
- Obstruction to system ventilation hole
Before installing this system, please ensure that:
- The power is switched off
- There is enough room for the system and its connecting cables
- The system is placed on an even surface
- The system is not placed near any electronic equipment. (For example, a microwave, radio, or any type of wireless equipment such
as a telephone or cell phone)
To unpack your DVR, follow these steps:
1. Place the box on a flat, clean surface.
2. Remove the box by pulling and lifting the system up with both hands.
3. Place the system down carefully.
4. Read the User Manual thoroughly before installing your system.
5. Make sure all the parts listed below have been included:
Main ELMO DVR Server and Remote Software ELMO DVR manual
Electrical cord for AC Windows 2000™/ WindowsXP
Keys Telephone cord
Keyboard ELMO DVR control cable
Mouse
Table 1. Required Items
3