Panasonic Lumix GH5S Mirrorless Camera User Manual
Page 356
12. Others
356
• Check the drive mode setting.
• Are you using the bracket function?
• The subject is beyond the focus range of the camera.
• Is [Shutter AF] in the [Custom] menu set to [OFF]?
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
• The shutter speed will become slower and the Image Stabilizer function may not work properly
when taking pictures especially in dark places.
>
We recommend using a tripod and the self-timer when taking pictures with a slow shutter
speed.
• Try the following:
>
>
Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction].
>
Set the [Long Shtr NR] to [ON].
• If you record a moving subject when using the electronic shutter or recording motion picture or
a 4K photo, the subject may appear distorted on the picture. This is characteristic of MOS
sensors which serve as the camera’s pickup sensors. This is not a malfunction.
• This is characteristic of MOS sensors which serve as the camera’s
pickup sensors.
This is not a malfunction.
• When using the electronic shutter
, lowering the shutter speed
may reduce the effect of the horizontal stripes.
• If noticeable flicker or striping is seen under lighting such as a
fluorescent or LED lighting fixture when recording motion pictures, set [Flkr Decrease]
It can reduce the flicker or striping by allowing you to set a fixed shutter speed.
You can set the shutter speed manually in the Creative Video Mode.
Multiple pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred.
The Image Stabilizer is not effective.
The recorded picture looks rough.
Noise appears on the picture.
The subject appears distorted on the picture.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.