P199) – Panasonic Lumix GH5S Mirrorless Camera User Manual
Page 199
199
7. Recording Motion Pictures
∫
Attaching the cable holder
The cable holder prevents the HDMI cable or USB connection cable from getting
disconnected by accident and the [HDMI] or USB socket from being damaged.
• Example: Attaching to an HDMI cable
1
While pushing
A
(
1
), slide the clamp
portion of the cable holder to remove it
(
2
).
2
Loosely mount the cable holder to the
mount on the camera (
3
), and rotate the
screws in the direction of the arrows to
secure the cable holder (
4
,
5
).
• Place the camera on a stable surface before
performing the work.
3
Attach the HDMI cable to the clamp
portion (
6
).
4
Slide the clamp portion to attach it to
the cable holder (
7
).
5
Connect the HDMI cable to the [HDMI]
socket (
8
).
B
Leave some slack so that this section has
a length of at least 10 cm (0.33 feet).
• You can also connect the HDMI cable and
USB connection cable at the same time
when the cable holder is attached.
Removing the cable holder
To remove the cable holder, follow the steps for attaching it in the reverse order.
• We recommend using an HDMI cable with a maximum thickness diameter of 6 mm
(0.24 inch).
• It may not be possible to attach cables of certain shapes.
• Keep the clamp portion of the cable holder out of reach of children to prevent swallowing.