Canon EOS 90D DSLR Camera with 18-135mm Lens - Manual (Page 47)

47
Inserting/Removing the Battery
Insert a fully-charged Battery Pack LP-E6N (or LP-E6) into the camera.
Insertion
1 Slide the battery compartment
cover lock and open the cover.
2 Insert the battery.

Insert the end with the electrical
contacts.

Insert the battery until it locks in place.
3
Close the cover.

Press the cover until it snaps shut.
o You cannot use batteries other than the Battery Pack LP-E6N or LP-E6.
Removal
Open the cover and remove the
battery.

Press the battery lock lever as shown by
the arrow and remove the battery.

To prevent short-circuits, always attach
the included protective cover ( = 44)
to the battery.