Shooting with the built-in flash – Canon EOS 90D DSLR Camera with 18-135mm Lens User Manual
Page 164
164
Shooting With the Built-in Flash
Using the built-in fl ash is recommended when the <
I
> icon appears in the
viewfi nder or on the screen, when subjects in daytime shots are backlit, or
when shooting under low light.
1
Press the <
I
> button.
2
Press the shutter button halfway.
Confi rm that a <
I
> icon appears in the
viewfi nder or on the screen.
3
Take the picture.
The built-in fl ash fi res according to
[Flash fi ring]
settings (
To retract the built-in fl ash after shooting,
push it down with your fi ngers until it
clicks into place.
Approximate Built-in Flash Range
(approx. range in meters / feet)
ISO Speed
EF-S18-135mm f/3.5-5.6 IS USM
Wide-angle End
Telephoto End
f/3.5
f/5.6
100
1–3.4 / 3.3–11.2
1–2.1 / 3.3–6.9
400
1–6.9 / 3.3–22.6
1–4.3 / 3.3–14.1
1600
1.7–13.7 / 5.6–44.9
1.1–8.6 / 3.6–28.2
6400
3.4–27.4 / 11.2–89.9
2.1–17.1 / 6.9–56.1
* It may not be possible to obtain standard exposure when shooting distant subjects at
high ISO speeds, or under certain subject conditions.