Canon EOS 90D DSLR Camera with 18-135mm Lens - Manual (Page 248)

248
Multiple Exposures
Merging Multiple Exposures with a RAW Image Recorded on
the Card
You can select a RAW image recorded on the card as the fi rst single
exposure. The selected RAW image will remain intact.
1 Select [Select image for multi.
expo.].
2 Select the fi rst image.

Use the <
Y
> <
Z
> keys to select the
fi rst image, then press <
0
>.

Select [OK] .
The fi le number of the selected image
will be displayed at the bottom of the
screen.
3 Take the picture.

When you select the fi rst image, the
number of remaining exposures as set
with [No. of exposures] will decrease
by 1.
o JPEG images cannot be selected.
o These images cannot be selected as the fi rst single exposure: Images
captured with [ z : Highlight tone priority] set to [Enable] or [Enhanced] , or
images captured with [ z : Still img aspect ratio] not set to [3:2] .
o [Disable] is applied for [ z : Lens aberration correction] and [ z : Auto
Lighting Optimizer] regardless of the settings of the image selected as the
fi rst single exposure.
o The ISO speed, Picture Style, high ISO speed noise reduction, color space,
etc. set for the fi rst image will also be applied for the subsequent images.
o If Picture Style is [Auto] for the image selected as the fi rst image, [Standard]
will be applied for shooting.
o You cannot select an image taken with another camera.
o Images that cannot be merged may be displayed.
o You can also select a RAW image used in multiple-exposure shooting.
o Select [Deselect img] to cancel image selection.