Epson C82324* - Manual (Page 56)

2. For all workstations running the utility program for
this product:
You need to create (or modify) the NET.CFG file for your workstation.
Create (or modify) the file, which includes the following strings, using
the DOS COPY command or editor. Make sure that the main section
headings are left-justified. Indent additional lines under each heading
with either a space or a tab. This example uses the Novell NE2000
network card.
Example:
after creating the NET.CFG file
link driver NE2000
frame ethernet_802.2
protocol IPX EO ethernet_802.2
frame ethernet_802.3
protocol IPX 0 ethernet_802.3
After creating (or modifying) the NET.CFG file, restart the
workstation to enable the settings.
Printed in USA 94.05-