Epson C82324* - Manual (Page 48)

Installing the Print Server on a Second File Server
How do I install my Ethernet Card print server on a second file server
with EPSETUP?
EPSETUP is required for initial installation, and is the easiest
method for configuring an Ethernet Card on a second file server.
In EPSETUP, select “Queues Serviced by Printer.” A list of file
servers displays. Select the
file
server where you would like to
install the Ethernet Card, then assign at least one queue. Save
your changes, and
select
“Reset Print Server.”
I installed my Ethernet Card print server with EPSETUP, but now I’d
like to configure it on a second file server using PCONSOLE. What do
I need to do?
To configure the print server to service queues on a second file
server using PCONSOLE, follow these steps:
1. Install on at least one file server using EPSETUP?
2. Log in to the master file server, and enter PCONSOLE (386, or
version 2.15c or higher).
3. In PCONSOLE, add the second file server to the service list.
Select:
Print Server Information,
Print Server Configuration,
File Servers Serviced.
Press INSERT, and add the second file server to the service
list.
4. Configure the print server on the file server you just added to
the service list. In PCONSOLE, select:
Change Current File Server.
Log into the file server you just added to the service list.
Troubleshooting 3-9