Epson C82324* - Manual (Page 43)

After Installation
Green fight On/Red On Error
I completed software installation with EPSETUP, but the Ethernet
Card can’t log into the network (green light on, red on). What’s wrong?
Check the Ethernet Card network connection. Is the Ethernet
Card connected to the network?
If the Ethernet Card has been renamed, was it renamed on the
master file server using EPSETUP or EPCONFIG? If the
Ethernet Card is renamed on the master file server using
PCONSOLE, the name change is not recognized by the Ethernet
Card hardware.
Check the diagnostic report. The current the Ethernet Card
hardware name appears in the second line of the diagnostic
report. Log into the master file server and enter PCONSOLE.
Rename the Ethernet Interface Card for NetWare, using the name
contained in the diagnostic report. Then enter EPSETUP or
EPCONFIG and rename the Ethernet Card as desired. (Note that
you do not need to reset the Ethernet Card after a name or
password change.)
3-4 Troubleshooting