Epson C82324* - Manual (Page 26)

Configuration Using EPSETUP
1. Log into the network with supervisor privilege.
2. Enter the EPSETUP utility.
3. Select “Change Current Print Server Configuration.”
4. Highlight the print server you would like to configure, and press
ENTER. If the Ethernet Card you want to configure does not
appear in the list of available servers, check to see that the
Ethernet Cards host printer is turned on and that the card is
connected to the network.
5. Select an option from “Print Server Configuration Options.”
6. See the appropriate section of this chapter for detailed
instructions.
Change Queues Serviced by Printer
1. Select “Queues Serviced by Printer” from “Print Server
Configuration Options.”
2. Press ENTER to select the Ethernet Cards LPT1 port. The screen
displays a list of currently serviced queues and file servers.
3. To delete a queue, highlight the queue and press DELETE. (To
delete multiple queues, highlight each queue and press F5.
Then press DELETE.)
2-2 Changing the Configuration