Epson C82324* - Manual (Page 37)

Turn Configuration Report Off/On
EPCONFIG
serial-number N=E RPT=NORP RP
Use this command to enable or disable configuration report
printing.
RP enables configuration report printing. Enter RPT=RP to enable
configuration report printing.
NORP disables configuration report printing. Enter RPT=NORP to
disable configuration report printing.
Example: EPCONFIG 06424922 N=E RPT=norp
Set Queue Polling Interval (Print Server)
EPCONFIG
serial-number N=E T=polling_time
Use this command to change the interval at which the parallel
port(s) checks queues for waiting print jobs. To reduce network
traffic, you can change the polling interval from the default (5
seconds) to up to 30 seconds.
The polling-time value can be set from 1 to 30 (seconds).
You cannot set the polling time if the Ethernet Card is operating
as a remote printer.
Example: EPCONFIG 06424922 N=E T=20
Set the Ethernet Network Type
EPCONFIG
serial-number N=E C=ethernet_type
C=ethernet_type specifies the communication standard in use.
Changing the Configuration 2-13