Sony Signature Series NW-WM1ZM2 Walkman Digital Music Player - Manual (Page 83)

83
Stream Menu
Stream
Note
When the Streaming tab settings are changed, RTSP streaming is temporarily interrupted. Therefore, the
screen turns black for a moment when the viewer is displayed on other web browsers.
Stream Setting
RTSP
This setting item is displayed when [Stream Setting] is set to [RTSP].
Make settings related to RTSP Streaming.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Setting RTSP/SRT-Caller/
SRT-Listener/
NDI|HX/Off RTSP The setting items corresponding to the selected
mode are displayed.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Port Number 554, 1024 to 65534 554 Set the port number for RTSP.
Time Out 0 to 600 60 Specify the time for time out by the Keep-Alive
command from RTSP streaming.
At the [0] setting, time out of the Keep-Alive
command is not available.
Authentication On/Off On Set whether or not to perform user authentication for
RTSP streaming. When enabled, the user name and
password set in [User] will be authenticated. The
viewer cannot be displayed unless the correct user
name and password are entered.
Notes
• The RTSP authentication setting affects acquisition
of the RTSP streaming on programs other than a
web browser. When you want to prevent getting
the streaming by users other than the ones you
set, set [Authentication] to On to use the camera.
• When the setting is changed, RTSP streaming is
temporarily interrupted. Therefore, the screen
turns black for a moment when the viewer is
displayed on other web browsers.
Video Port
Number 1 1024 to 65534 51000 Specify the transmission port number for video data
used for RTSP unicast streaming.
Video Port
Number 2 1024 to 65534 53000 Specify an even number in the setting range. Two port
numbers (the number specified here and an odd
number with 1 added to the specified number) are
actually used for video data communication and
control. When performing simultaneous multi-
transmissions, a different port number will be used
for every transmission, based on the port number
specified here.