Sony Signature Series NW-WM1ZM2 Walkman Digital Music Player - Manual (Page 72)

72
Others
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Image Stabilizer On/Off Off Enables displaying steadier images when the camera
is installed in a place subject to vibration.
Notes
• When the Image stabilizer function is set, the
angle of view of the image will be smaller than
usual.
• Depending on the vibration frequency, Image
stabilizer may not work even when it is set.
• Select the checkbox of [Image Stabilizer] when
installing the camera.
• When PTZ Auto Framing is used, set this setting to
[Off].
Flicker Cancel On/Off Off Enables the flicker correction feature.
Notes
• Depending on conditions such as the type of
illumination and shutter speed, the flicker
correction feature may not be effective.
• If the shooting frame rate is close to the power
supply frequency, the flicker correction feature
may not be able to fully remove flickers even
when it is enabled. If this happens, adjust the
shutter speed.
• We recommend you to clear the checkbox of
[Flicker Cancel] when shooting under lights where
no flicker is generated, such as outdoors.