Sony Signature Series NW-WM1ZM2 Walkman Digital Music Player - Manual (Page 70)

70
High Resolution Mode
NR
Bandwidth Standard/Low/
Middle/High/Wide Standard You can set the bandwidth for signals undergoing
contour emphasis. For example, when you select
[Middle], the middle range of the signals is elevated
and contours in that middle range are emphasized.
Crispening 0 to 7 3 You can set the fineness for the objects to which
contour correction signals are added. When you
select a higher value, minute contour correction
signal elements are removed, and only the high level
contour correction signals which reduces noise are
left. When you select a lower value, minute contour
correction signal elements which increases noise are
added to the video.
HV Balance –2 to +2 0 You can set the aspect ratio for contour correction
signal elements. When you select a higher value, the
horizontal contour correction elements become
greater compared to the vertical elements.
BW Balance Type 0/Type 1/
Type 2/Type 3/
Type 4
Type 2 You can adjust the balance between contours in black
on the low brightness side and contours in white on
the high brightness side.
The ratio of contours in black is higher for [Type 0]
while the ratio of contours in white is higher for [Type
4].
Limit 0 to 7 3 You can set the maximum value for the amount of
contour emphasis in black on the low brightness side
and in white on the high brightness side.
Highlight Detail 0 to 4 0 You can adjust the contour level added to brightly-lit
objects.
The higher the value, the greater the contour
emphasis. Set when you want to emphasize the
contour of a brightly-lit object in a bright background.
Super Low 0 to 7 3 Emphasizes contours in the super low range.
The higher the value, the greater the contour
emphasis. Contrast and resolution increase.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
High Resolution
Mode On/Off Off Enable emphasizing edges for higher-resolution
images.
Notes
• When enabled, image noise may increase.
• When [Mode] is set to [Manual] in [Detail], the
function is not available.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
NR Mode Simple/Advanced Simple Select the noise reduction setting.
[Simple]: Sets the noise reduction strength of 2D/3D
at the same level and removes noise simultaneously.
[Advanced]: Sets the noise reduction strength of 2D/
3D individually and removes noise simultaneously.
NR (XDNR) 0 to 5 3 Sets the noise reduction level.
When selecting [0], the noise reduction function is
turned to Off. The higher the number, the greater the
noise reduction effect.
You can set when [NR Mode] is set to [Simple].
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content