Sony Signature Series NW-WM1ZM2 Walkman Digital Music Player - Manual (Page 81)

81
PTZF Control Menu
PTZF Control
Configure the pan/tilt, zoom, and focus setting.
Zoom (SRG-A40)
Focus
Pan-Tilt
Preset
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Zoom Mode Optical / Clear
Image Zoom /
Digital Optical Select the range of zooming.
[Optical]: An image can be zoomed up to 20× optical
zoom.
[Clear Image Zoom]: An image is zoomed with less
deterioration of image quality over the optical region.
Zooming is up to 1.5× when the video output format is
3840×2160, and up to 2× for other formats.
[Digital]: An image can be zoomed up to 20× optical
zoom and 12× digital zoom (including Clear Image
Zoom) with up to a total of 240× zoom.
Note
When [Zoom Mode] setting is changed, set [Start
Position] and [Detection Settings] of [PTZ Auto
Framing Settings] again.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Focus Near Limit 0.08 / 0.17 / 0.35 /
0.6 / 1 / 2 / 5 0.35 Set the range at which to automatically focus. If a
subject is nearer than the set range, it will not be
focused. The value is for reference.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Slow Pan-Tilt
Mode Normal / Slow Normal When [Slow] is selected, pan-tilt is set to [Slow Pan-
Tilt Mode].
The setting cannot be changed while performing PTZ
Auto Framing.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Speed Select Separate / Common Separate Select the preset recall speed.
[Separate]: Pan/tilt works with the speed set by each
preset.
[Common]: Pan/tilt works with the common speed to
all presets.
Common Speed 1 to 25 25 This is enabled when [Speed select] is [Common].
Pan/tilt speed for a preset recall which is common to
all presets.