Bvm-e171 – Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters User Manual
Page 87
![background image](https://www.manualsdir.com/files/868212/content/doc087.png)
Specifications
87
Output
SDI
BNC (×2) (monitor output)
Output signal amplitude: 800 mVp-
p±10%
Output impedance: 75 ohms
unbalanced
Transmission distance:
3G-SDI: 70 m max.
1)
HD-SDI: 100 m max.
1)
SD-SDI: 200 m max.
2)
Composite output
BNC type (×1)
Loop-through
3)
, with 75 ohms
automatic terminal function
DC 12V OUT
Circle 4-pin (female) (×1)
1) When using the 5C-FB coaxial cable made by Fujikura Ltd.
or equivalent
2) When using the 5C-2V coaxial cable made by Fujikura Ltd.
or equivalent
3) When the unit is turned off, the signal wave may be
distorted.
General
Power requirements
100 V to 240 V AC, 1.2 A to 0.6 A, 50/
60 Hz
24 V to 28 V DC, 4.5 A to 3.9 A
Power consumption
Approx. 117 W (when AC power
source is used) / Approx. 107 W
(when DC power source is used)
(max.)
Approx. 55 W (when AC power source
is used) / Approx. 51 W (when DC
power source is used) (average
power consumption in the default
status)
0.3 W (In off-mode (When the power
switch is off))
Operating temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended: 20 °C to 30 °C (68 °F to
86 °F)
Operating humidity
30% to 85% (no condensation)
Storage/transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage/transport humidity
0% to 90%
Operating/storage/transport pressure
700 hPa to 1060 hPa
Mass
Approx. 10.3 kg (22 lb 11 oz)
Accessories supplied
AC power cord (1)
AC plug holder (1)
HDMI cable holder (1)
Before Using This Unit (1)
European Representative (1)
Optional accessories
BKM-17R/BKM-16R Monitor Control
Unit
BKM-37H/BKM-38H Controller
Attachment Stand
SMF-17R20 Monitor Interface Cable
BVM-E171
Picture performance
Panel
OLED panel
Picture size (diagonal)
419.7 mm (16
1
/
2
inches)
Effective picture size (H × V)
365.8× 205.7 mm
(14
1
/
2
× 8
1
/
8
inches)
Resolution (H × V)
1920 × 1080 pixels (Full HD)
Aspect
16:9
Pixel efficiency 99.99%
Panel drive
RGB 10-bit
Panel display frame rate
48 Hz, 50 Hz, 60 Hz
1)
See “Picture Frame Display” (page 97).
Viewing angle (Panel specification)
89°/89°/89°/89° (typical)
(up/down/left/right, contrast > 10:1)
Normal scan
0% scan
Native scan
Mapping the pixels of the signal to the
panel to one-to-one mode, or
displaying an SD signal of non-
square pixels (the number of H
pixels of the signal system is 720 or
1440) or a 640 × 480 SD signal of
HDMI video by scaling processing
of doubling for the V direction and
correct aspect ratio for the H
direction and also optimizing and
displaying a picture by modifying
the aperture coefficient value, filter
coefficient value, etc.
Under scan
3% under scan
Over scan
Mask of 5% over scan portion in the
normal scan
Color temperature
D55, D61, D65, D93, DCI
2)
(Setting
possible in other color temperature)
Standard luminance (100% white signal input)
100 cd/m
2
(Preset1-Preset5)
48 cd/m
2
(Preset(DCI))
Color space (color gamut)
ITU-R BT.709, EBU, SMPTE-C, DCI-
P3
3)
, E171 Native
4)
, S-GAMUT/S-