Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 55)

Adjustment Using the Menus
55
[Capture]
Captures the still picture for the standard of the color
evaluation (HD Frame Capture).
Note
Use the BKM-16R with software version 1.6 or higher or
BKM-17R to use the HD Frame Capture function.
Capturing the Picture of the HD Signal (HD
Frame Capture)
The frame picture of the 3G/HD-SDI input signal is
captured and saved as a picture file in the USB memory
stick, etc. This is used to confirm the color tone and
picture angle of the current scene and recorded scene, or
as the reference picture to adjust the monitor.
To save the captured frame, we recommend using
“Memory Stick PRO (High-Speed)” or “Memory Stick
PRO Duo (High-Speed)”.
Notes
 Use the BKM-16R with software version 1.6 or higher
or BKM-17R to use the HD Frame Capture function.
 The file is saved in TIFF. The file size is a maximum of
13 MB.
 The picture file is captured or loaded without
deterioration.
 The saved file may not be opened due to the PC
application used.
 The HD Frame Capture function is effective only for
the 3G/HD-SDI signal.
 The interlace input signal is captured in each frame
(first field (F=0) and second field (F=1)).
 The frame is not captured in the following cases:
– When [Side by Side], [Wipe], [Butterfly], or
[Blending] is set to [On]
– When [Pixel Zoom] is set to on
– When the internal signal is displayed
– When the input signal has no sync signal
– When the captured frame is displayed
 When a BVM-E/BVM-F series monitor or this unit
with software version earlier than 1.1 is used, pictures
that have been captured in the following Gamma
menus cannot be loaded.
[S-LOG3(SDR)], [S-LOG2(SDR)], [2.4(HDR)], [S-
LOG3(HDR)], [S-LOG2(HDR)], [SMPTE
ST2084(HDR)], [ITU-R BT.2100(HLG)], or [S-
LOG3(Live HDR)]
To capture
1
Connect the USB memory stick, etc. to the
controller.
For details on the USB memory stick, see “Inserting/
Ejecting the USB memory stick” on page 101. For the
memory stick, see the operating instructions of BKM-
16R.
2
Display the picture and press the CAPTURE button
of the controller at the point on the picture to be
captured.
The captured still picture appears on the display.
To hide characters on the monitor, set the CHAR
OFF button to on. As the characters are hidden, it
becomes easy to confirm the still picture. To display
the characters, set the CHAR OFF button to off.
3
Press the ENTER (Ent) button.
The display of the captured still picture is cleared
and saving in the USB memory stick, etc. of the
captured frame starts.
The “In progress

” is displayed and “

” flashes
during data saving. (It may take some time to write
the data.)
Submenu Setting
[Load] Loads the captured picture from the
USB memory stick, etc.
When the item is selected, you can
select the file name to be loaded.
[Rename] Changes a file name of the captured
picture in the USB memory stick, etc.
When the item is selected, the file
names are displayed.
When the file name is selected, you can
change the file name (1 to 20
characters).
 Existing file name: Enter the
existing file name.
 [New Name]: Enter a new file name.
Note
“.” must not be used as the first
character.
[Delete] Deletes the file of the captured picture
in the USB memory stick, etc.
When the item is selected, the file
names in the USB memory stick, etc.
are displayed.
When the file name is selected, the
following message appears.
[Delete this file ?]
 [OK]: To delete the data, press the
ENTER (Ent) button.
 [Cancel]: To cancel, press the
MENU button.