Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 15)

Preventing Falling of the Monitor (BVM-E251)
15
Configuration] menu, the monitor can also be set to
enter sleep mode when the power switch is turned on.
Note
If a no input-signal state continues for 60 minutes, the
monitor is powered down automatically by the Auto
Power Down function. To turn on the monitor, cut off
the power supply or turn off the power switch, then turn
the power back on. To change the settings, see [Auto
Power Down] (page 63) of [Power] in the [System
Configuration] menu.
Preventing Falling of the
Monitor (BVM-E251)
1
Tie a piece of stout string (commercially available)
to the left and right handles of the monitor.
2
Secure the ends of the string to the floor or wall.
String
String
String