Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters - Manual (Page 13)

Location and Function of Parts and Controls
13
Rear Panel

SDI input and output connectors (BNC)
SDI 1 IN connector
Input connector for serial digital signals.
SDI 2 IN connector
Input connector for serial digital signals.
MONITOR OUT connector
MONITOR OUT for SDI 1 IN and SDI 2 IN
connectors.
Notes
 MONITOR OUT is activated when the unit is
turned on or in sleep mode.
 MONITOR OUT cannot be used when powered
down by the Auto Power Down function or when
the main power is off.

COMPOSITE input and output connectors
(BNC)
IN connector
Input connector for composite video signals.
OUT connector
Loop-through output connector.
Notes
 When the composite signal is used, adjust the signal
level in the [Picture Adj] menu (page 32).
 When inputting a video signal with the jitters, etc.
the picture may be disturbed. We recommend using
the TBC (time base corrector).
 When the unit is turned off, the signal wave of the
COMPOSITE input and output connectors may be
distorted.
BVM-E251
BVM-E171