Sony ECM-X7BMP Electret Condenser Lavalier Microphone for UWP Transmitters User Manual
Page 64
Adjustment Using the Menus
64
[Closed Caption]
Sets the items for the closed caption display.
Note
When [Format] of the [Channel Configuration] menu is
set to [Composite] or [HDMI], the closed caption
cannot be displayed.
[Audio Level Meter]
Sets the audio level meter.
Notes
When [Format] of the [Channel Configuration] menu
is set to [Composite] or [HDMI], the audio level meter
cannot be displayed.
The items selectable with [Audio CH] are different
depending on the input signal.
[Position]
Sets the display position for the signal
system.
[Top Left]:
top left
[Top Center]:
top center
[Top Right]:
top right
[Bottom Left]:
bottom left
[Bottom Center]:
bottom center
[Bottom Right]:
bottom right
[CH No]
Sets the display mode of the channel
number.
[Auto]:
Disappears after being
displayed for a while.
[Off]:
Not displayed.
[Position]
Sets the display position for the channel
number.
[Top Left]:
top left
[Top Center]:
top center
[Top Right]:
top right
[Bottom Left]:
bottom left
[Bottom Center]:
bottom center
[Bottom Right]:
bottom right
[CH Name]
Sets the display mode of the channel
name.
[Auto]:
Disappears after being
displayed for a while.
[Off]:
Not displayed.
[Position]
Sets the display position for the channel
name.
[Top Left]:
top left
[Top Center]:
top center
[Top Right]:
top right
[Bottom Left]:
bottom left
[Bottom Center]:
bottom center
[Bottom Right]:
bottom right
[Scan Mode]
Sets the display mode of the scan mode.
[Auto]:
Disappears after being
displayed for a while.
[Off]:
Not displayed.
[Position]
Sets the display position for the scan
mode.
[Top Left]:
top left
[Top Center]:
top center
[Top Right]:
top right
[Bottom Left]:
bottom left
[Bottom Center]:
bottom center
[Bottom Right]:
bottom right
Submenu
Setting
[Closed Caption]
Sets whether or not to display closed
caption signal ([Off] or [On]).
Submenu
Setting
[Type]
Sets the closed caption type.
[Auto1]:
Select to set to 608(VBI)
when the SD-SDI signal is input or
708 when the HD-SDI signal is
input.
[Auto2]:
Select to set to 608(VBI)
when the SD-SDI signal is input or
608(708) when the HD-SDI signal is
input.
[708]:
Select to display the closed
caption signal of the EIA/CEA-708
standards.
[608(708)]:
Select to display the
closed caption signal of the EIA/
CEA-608 standards transmitted by
EIA/CEA-708 standards.
[608(VBI)]:
Select to display the
closed caption signal of the EIA/
CEA-608 standards transmitted by
using the line 21.
[Service 708]
Sets Service when [Type] is set to [708].
You can select from [Service1] to
[Service6]. (Default value: [Service1])
[Service 608]
Sets Service when [Type] is set to
[608(VBI)] or [608(708)].
You can select from [CC1] to [CC4] or
[Text1] to [Text4]. (Default value:
[CC1])
[OSD Level]
Sets the luminance of the letter.
You can select from [High] (bright) or
[Low] (dark).
Submenu
Setting
[Audio CH]
Sets the audio channel.
When the Dual Link and 3G-B signal
is input
Select [CH1-CH8] or [CH9-CH16].
When another signal is input
[CH1-CH8] and [CH9-CH16] is set.
[Position]
Sets the display position of the audio
level meter.
Select [Bottom] (lower) or [Top]
(upper).
[Transparency]
Sets the background transparency of the
audio level meter.
[Black]:
The background becomes
black.
[Half ]:
The background becomes
translucent.
Submenu
Setting